Code Administrators Association of Kentucky & Department of Housing, Buildings and Construction
Classes are limited to 50 participants.
Click course name below for details and registration link.
May 26, 2020
9 a.m. - 4 p.m. EST
6 CEU credits awarded to: AIA, ICC, Kentucky Building Inspectors Certification Program and Louisville Metro Residential Building Contractors continuing education credits
This seminar addresses the key issues of the 2015 International Building Code® (IBC®) regarding the proper classification of buildings. The process for correctly evaluating a building for code compliance relies on a systematic approach to the determination of occupancy classification and construction type. Everything starts with the correct building classification! A clear understanding of the classification process provides the groundwork for the proper application of many other important code provisions.
The following publication is recommended to ensure success in the course: 2015 International Building Code
Webinar Goal: Participants will be able to assign the appropriate occupancy classification, use Table 601 to assist in building classification, and gain an understanding of the varied provisions of Chapter 5 regarding allowable building heights and areas.
May 27, 2020
9 a.m. - 4 p.m. EST
6 CEU credits awarded to: AIA, ICC, Kentucky Building Inspectors Certification Program, Kentucky Fire Alarm License Holders and Louisville Metro Residential Building Contractors continuing education credits
This course discusses the details and requirements for dampers, penetration firestops and joint systems. Including a look at the concepts, testing and installation and where each of the systems is required by code. The International Building Code (IBC) uses fire-resistive rated assemblies to protect the buildings structural system, to separate adjacent spaces within the building that are not compatible, or to separate and protect adjacent buildings. In addition, the code uses smoke-resistant assemblies to limit the spread of smoke within a building and the dangers it would create for the occupants. Any opening or penetration within the rated assemblies has the potential to reduce the assembly`s performance. This course will focus on the protection provided by dampers, penetration firestops and joint systems to ensure the building and occupants are adequately protected.
The following publication is recommended to ensure success in the course: 2015 International Building Code
June 1, 2020
9 a.m. - 4 p.m. EST
6 CEU credits awarded to: AIA, ICC, Kentucky Building Inspectors Certification Program and Louisville Metro Residential Building Contractors continuing education credits
This course is a bridge between the complex world of geotechnical engineering and foundation design and construction activities and inspections dealing with soil conditions and building foundations. This course is intended to provide an understanding of the principals involved in geotechnical engineering and foundation design. The course will help the attendee better communicate with geotechnical and structural professionals. Case studies will include reviewing sample soil reports and discussions of what to look for when soil reports are part of the plan review submittal.
Goal: The goal of this course is to obtain a basic understanding of geotechnical engineering and foundation design and to apply the critical concepts of the IBC or IRC to the evaluation of a soils report and inspections of soils and building foundations.
The following publications are recommended to ensure success in the course: 2015 International Building Code and 2015 International Residential Code
June 9, 2020
9 a.m. - 4 p.m. EST
6 CEU credits awarded to: AIA, ICC, Kentucky Building Inspectors Certification Program, KY Fire Alarm License Holders and Louisville Metro Residential Building Contractors continuing education credits
This seminar provides code officials and design professionals with:
- An understanding of the Chapter 9 fire protection system requirements in the 2015 IFC and 2015 IBC.
- The design and operation of various fire-extinguishing and fire detection and signaling systems.
- A review of the applicable National Fire Protection Association (NFPA) standards for fire protection systems.
- The requirements for the inspection and maintenance of fire protection systems.
The following publications are recommended to ensure success in the course: 2015 International Building Code® (IBC®) and 2015 International Fire Code® (IFC®)
June 11, 2020
9 a.m. - 4 p.m. EST
6 CEU credits awarded to: AIA, ICC, Kentucky Building Inspectors Certification Program and Louisville Metro Residential Building Contractors continuing education credits
This seminar will focus on the key changes from the 2015 International Residential Code® (IRC®). The details provided will enhance your understanding of mechanical terminology, equipment, materials and methods of installation as related to residential construction. This seminar concentrates on the mechanical portion of the IRC along with the appropriate portions of the International Fuel Gas Code® and the International Energy Conservation Code®. It covers the minimum requirements for residential mechanical inspections. You will also discuss major portions of a residential plan. This seminar will provide information so that the residential mechanical inspector can perform inspection tasks that are consistent with the requirements in the 2015 IRC.
The following publication is recommended to ensure success in the course: 2015 International Residential Code
Webinar Goal: To provide an overview of the 2015 IRC Performing Residential Mechanical Inspections, to enable you to perform a residential mechanical inspection. This course is designed to assist those code users in identifying the specific code changes that have occurred and, more important, understanding the reason behind the change.
June 16, 2020
9 a.m. - 4 p.m. EST
6 CEU credits awarded to: AIA, ICC, Kentucky Building Inspectors Certification Program and Louisville Metro Residential Building Contractors continuing education credits
This seminar provides a comprehensive explanation of the 2015 International Residential Code® (IRC®) Wood Wall bracing requirements. The seminar will focus on basic requirements and clarify the application of wall bracing provisions in the IRC wall bracing Sections R602.10 thru R602.12.
Webinar Goal: Participants will successfully apply the provisions of the 2015 IRC to case studies involving bracing requirements for wood-framed residential structures in their region.
NOTE: Discounts will be taken at time of checkout.
The following publication is recommended to ensure success in the course: 2015 International Residential Code